incra miter slider sE

jig & fixture components > build-it system

INCRA Miter Slider SE

incra
miter slider SE

Part Number: IMS1SE & IMS2SE


Available in two lengths: 18” & 25.5”.

When you need to build super-accurate sliding jigs and fixtures, the INCRA Miter Slider SE combines the time savings of the original aluminum Miter Slider with the unique performance and feel of the adjustable GlideLOCK Miter Bar used on INCRA Miter Gauges. These beefy miter slot runners are perfect for the most demanding jig applications!

The heavy steel construction is more rigid than any wooden or plastic runners, and they're not susceptible to changes in humidity or temperature. Miter Slider SE bars are drilled and tapped with two separate bolt patterns: (4) #10-24 holes attach the bars quickly to your own custom jigs and they also match perfectly with the INCRA Build-It Panels. These #10 holes are spaced identically to the original Miter Slider, so the Miter Slider SE is a direct, bolt-on upgrade to jigs and fixtures you may have already constructed Miter Sliders. There's also a second set of (3) 1/4"-20 holes evenly spaced along the length to accept knobs and other fasteners commonly used when building jigs and fixtures.

Long-wearing Nylon GlideLOCK adjusting discs conveniently adjust from the top and provide a precise fit in the miter slot of most table saws, router tables, and band saws, and the discs also give the bars a smooth, low-friction travel. The 18" bar has two pairs of discs, and the 25.5" bar has three pairs. Both sizes include removable T-slot retaining clips for BOTH ends of the bar for superior stability of larger jigs.

Long-wearing Nylon GlideLOCK adjusting discs

Compatibility:

The Miter Slider SE will fit square-sided miter slots approximately 3/4" wide, 3/8" deep, and with or without a 15/16"-wide T-slot at the bottom. The GlideLOCK adjustment will accommodate slots measuring 0.740" to 0.765" in actual width.

The Miter Slider SE is not recommended for stationary jigs that must be locked into position within a miter slot. The standard aluminum Miter Slider is the best choice for these applications.


just connect the parts:







video

detail focus

INCRA Miter Slider SE

INCRA Miter Slider SE
The steel bars are more rigid than any wooden or plastic runners. Also compatible with all INCRA Build-It products.

downloads

Image

Click to download INCRA Miter Slider Manual in PDF format.

accessories

INCRA T-Track RegularINCRA T-Track Regular Single T-Track, no scale. Choose from four lengths. Can be cut to fit your jig exactly.
INCRA T-Track PlusINCRA T-Track Plus The only T-Track with an included adjustable scale. Choose from four lengths. Can be cut to fit your jig exactly.
INCRA T-Slot Panel ConnectorINCRA Build-It T-Slot Panel Connectors Interconnect the 5/8” pre-cut and pre-drilled MDF Build-It Panels in seconds. Adds strength, rigidity and a rock solid T-slot.
INCRA Build-It PanelsINCRA Build-It Panels These universal 5/8" MDF Panels are pre-cut and pre-drilled to instantly accept INCRA's Miter Sliders and T-Slot Panel Connectors.