|INCRA Miter Gauge Combo Pack
Part Number: ME/1000SE
the max savings on the INCRA Miter Gauge Combo Pack.
The package includes the INCRA Miter 1000SE plus
the INCRA Miter Express.
This combination of two great INCRA crosscutting
tools is incredibly practical and
convenient. When mounted to the Miter Express, the
Miter1000SE can easily crosscut 24"-deep panels,
offers the increased control of using a sled, and
allows great safety for cutting small parts using
the Miter Express' heavy duty hold down clamp and
T-slots that easily accommodate shop-made jigs and
fixtures. The Miter 1000SE can also be removed from
the Express sled in seconds and used by itself for
quick solutions to a variety of operations, such
as working at a router table or cutting bevels with
the saw blade tilted.
The Miter Express & Miter 1000SE Combo offers
versatility not available anywhere else at a price
that makes it a fantastic value!
Gauge Combo Pack Features:
& Lock Any Brand of Miter Gauge
Removing your gauge is just as easy - simply
release three locking screws and lift your
gauge out cleanly. There is absolutely no
modification required to your miter gauge
for this speedy lock and release feature.
T-Slot Retaining Clips
The Miter Express features removable front
T-Slot Retaining Clips for sled stability
at both the
beginning and end of deep crosscuts.
The Miter Express features a miter bar that's
conveniently adjustable from above for a perfect
fit in standard miter gauge slots measuring
3/4" wide, 3/8" deep, and with or
without a 15/16" T-slot at the bottom.
The miter bar's adjustment range accommodates
actual slot widths of 0.740" to 0.760".
The Miter 1000SE's 6 expansion disks adjust
both sides of the bar for ZERO side play,
anti-friction travel on all table saws with
standard miter gauge channels, including Delta,
Craftsman, imports, etc. This means that all
of INCRA's incredible precision will actually
show up in your work because the bar CAN'T
wiggle around in the miter slot. The Miter
1000's adjustable miter bar will fit square-sided
miter slots measuring 3/4" wide, 3/8"
deep, and with or without a 15/16" T-slot
at the bottom. The miter bar's adjustment
range accommodates actual slot widths between
0.740" and 0.765".
Edition Telescoping INCRA-LOCK Fence
This Special Edition Miter Fence telescopes
from 18" to a full 31" length and
features a front T-slot for adding a wooden
zero-clearance sub fence. The Miter 1000SE's
Flip Shop Stop is equipped with INCRA's patented
incremental positioning racks for incredible
cut-length accuracy and 100% day-to-day repeatability.
Edition 1/10th° Vernier Cursor
Precision angle indexing teeth are laser cut
in solid steel to lock in positive angle stops
every 5° over a 180° range, with special
stops at 22-1/2" and 67-1/2". A
stainless steel vernier cursor delivers an
incredible 1/10th° resolution between
Any Miter Gauge's Crosscut Capacity to 24"
and Securely Holds Even
the Smallest Workpieces for Safe Accurate Cuts
The crosscut capacity of any miter gauge is safely
doubled to more than 24" when docked on top
of the Miter Express. For these extra-large crosscuts,
the non-drag support provided by the sliding panel,
along with the extra holding power of the included
Hold Down Clamp adds much needed stability and control.
The same INCRA Hold Down Clamp also keeps your fingers
comfortably away from the blade when cutting workpieces
that are too small to safely hold by hand.
The Miter Express also includes an Outboard Fence
Support that locks behind your fence in one of the
two T-Slots, providing even more rigidity for all
Assembles easily and
2 cuts give you perfect zero clearance
The sliding main panel and the locking drop-off
support panel are each trimmed with one simple cut
during assembly for a perfect fit on YOUR table
saw, and the sled can be set up on either the right
side or left side of the blade. The result is true
Zero-Clearance Tearout Control on BOTH sides of
the blade. The Miter Express is instantly removable
from your saw table when making rip cuts or other
operations that don't require a sled. And thanks
to INCRA's quick release feature, your miter gauge
undocks from the Express in seconds whenever you
want to use your gauge on another tool such as a
router table or sanding station.
The Miter Express is available in a special version
to fit Shopsmith miter slots, which are both narrower
shallower than 3/8" x 3/4" standard miter
slots (use the options selector above). This version
will accept miter gauges with either standard-size
or Shopsmith-size miter bars.
Please note: The Miter 1000SE is NOT available with
a Shopsmith-size miter bar and
CANNOT be used directly on the Shopsmith table,
as there is insufficient clearance between the blade
and miter gauge on those machines.
However, the Express & Miter 1000 Combo does
allow the miter gauge to be quickly removed and
used on other machines that have standard miter
slots, such as a router table or conventional table