:: Precision Fences
    Router Table Fences
    Table Saw Fences
    INCRA I-BOX new
    Router System Accessories
    Router Tables & Stands

 :: Miter Gauges
    Miter Express
    Miter V27
    Miter V120
    Miter V120 Shopsmith
    Miter 1000
    Miter 1000HD
    Miter 1000SE Telescoping Fence
    Miter 3000
    Miter 3000SE Telescoping Fence
    Miter 5000 Miter Sled
    Miter Gauge Combo Pack
    Miter Accessories
    Comparison Chart

 :: Measuring, Marking & Layout
    Squares & Angles
    Marking Rules
    Bend Rules
    T-Rules
    Specialty Rules
    Custom Rules
    Rule Sets
    INCRA Gauge

 :: Jig & Fixture Components
    Build-It System
    Tracks
    T-Tracks
    Miter Sliders
    Miter Channels
    Right Angle Fixture

 :: Books, Plans, Videos &
    Accessories

    Free Plans
    Instructional Videos
    Books & Plans
    Stops
    HingeCrafter

 :: Become an INCRA Insider
 :: Photo Gallery
 :: Perry’s Tool Zone
 :: Parts & Components
 ::
INCRA Awards


 >> IncrementalTools.com
 
 

INCRA MAST-R-LIFT II INCRA PRL-V2 LIFT
MAGNALOCK PLATE MAGNALOCK RING SET WHEEL KIT
HINGECRAFTER RAIL SUPPORT LEGS

INCRA CleanSweep Downdraft
Dust Collection Cabinet

Part Number: CLEANSWEEP

Individual INCRA CleanSweep MagnaLOCK Rings
Part Number: CS-MLRINGSET
INCRA 6-pc CleanSweep
MagnaLOCK
Ring Set
Part Number: CS-MLRINGSET
INCRA CleanSweep MagnaLOCK Porter-Cable Guide Bushing Ring
Part Number: CS-MLRGUIDE
INCRA CleanSweep Router
Table Adapter

Part Number: CS-ADAPTER
   
INCRA CleanSweep Downdraft Dust Collection Cabinet new
Part Number: CLEANSWEEP
 
Use the power of your shop's dust collection system to grab sawdust where it's produced - on your router table! 

The CleanSweep Cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, JessEm, and many others (see compatibility notes* below).

The vacuum generated inside the cabinet by your 4" dust collection hose pulls chips and fine dust downward past the router bit, keeping the table surface and your surrounding shop cleaner than you'd ever imagined.  The effect is even more powerful when combined with INCRA CleanSweep Rings for MagnaLOCK router plates and router lifts.

Unlike a dust port mounted on the fence, the CleanSweep cabinet works for every cut and not just when the fence is covering the router bit, giving you excellent collection even when routing grooves, making box joints & dovetails, or shaping curved edges without a fence.

This must-have accessory is one of the easiest ways to improve the quality of your router table time!

Note:
The CleanSweep cabinet is intended for use only with conventional woodworking dust/chip collectors that have a minimum 4" inlet diameter.

 
  INCRA CleanSweep Router Table Dust Collection Cabinet Features:
  Keeps Your Shop Cleaner by Collecting Sawdust at the Source
  Works for Every Cutting Operation Including Routing Grooves and
   Cutting Box Joints & Dovetails
  Installs Easily on Every INCRA Router Table
  Reduces Router Noise
  Combine with INCRA CleanSweep Rings for Added Performance
  Precision Molded ABS & Steel Cabinet Assembles Quickly & Accurately
  Integrated 4" Steel Blast Gate, 4" Hose Clamp and Mounting
   Hardware Included
  Vertically-sliding Door Saves Space, Seals Tightly, and Won't Slam Closed
 

*Compatibility notes for common router table types:
The CleanSweep cabinet screws directly to the underside of laminated MDF and phenolic router tables that have their bottom table opening and related hardware within the CleanSweep's 9-1/8" x 12-3/4" inside dimensions.  The cabinet's overall height is 15-3/4" from the mounting flange to the end of the dust port.

Kreg , Woodhaven, and laminated MDF tables from JessEm require the CleanSweep Table Adapter to clear the bottom-mounted leveling mechanism used at their table openings' corners.

The CleanSweep cabinet is not directly compatible with router tables that use remotely-operated router lifts. Router table, hose, and router lift not included.

Individual INCRA CleanSweep MagnaLOCK Rings new
Part Number: CSMLR-SINGLE

Use the power of your shop's dust collection system to grab sawdust where it's produced, even for previously dusty work like routing grooves, box joints and dovetails!

These laser-cut steel rings feature extra openings in strategic locations to dramatically increase dust-collecting downward airflow when combined with an INCRA CleanSweep Dust Collection Cabinet and your 4" dust collection hose.

The rings fit all INCRA MagnaLOCK Plates and Lifts produced since 2006 (see compatibility below) and are available in inside diameters to cover wide variety of router bits - 3/8", 5/8", 1", 1-3/8", 1-5/8", & 1-7/8".

Order the complete 6-piece ring set here and save $15 off the combined individual rings.

Downdraft-style dust collection works for every cut, not just when the fence is over the router bit, and it's one of the easiest ways to improve your router table experience!

spacer

*Compatibility notes for common router table types:
These rings fit ONLY 2006- or newer INCRA router plates and lifts that have a 3-5/8" opening through the bottom of the plate.  This ring is NOT compatible with grey phenolic MagnaLOCK router plates or first-generation gold INCRA Mast-R-Lifts that have a 3-1/2" opening through the bottom of the plate.

INCRA 6-pc CleanSweep MagnaLOCK Ring Set new
Part Number: CS-MLRINGSET

Use the power of your shop's dust collection system to grab sawdust where it's produced, even for previously dusty work like routing grooves, box joints and dovetails!

The laser-cut steel rings feature extra openings in strategic locations to dramatically increase dust-collecting downward airflow when combined with an INCRA CleanSweep Dust Collection Cabinet and your 4" dust collection hose.

The rings fit all INCRA MagnaLOCK Plates and Lifts produced since 2006 (see compatibility below) and are available in inside diameters to cover a wide variety of router bits - 3/8", 5/8", 1", 1-3/8", 1-5/8", & 1-7/8".

Downdraft-style dust collection works for every cut, not just when the fence is over the router bit, and it's one of the easiest ways to improve your router table experience!

spacer

*Compatibility notes for common router table types:
These rings fit ONLY 2006- or newer INCRA router plates and lifts that have a 3-5/8" opening through the bottom of the plate.  These rings are NOT compatible with grey phenolic MagnaLOCK router plates or first-generation gold INCRA Mast-R-Lifts that have a 3-1/2" opening through the bottom of the plate.

INCRA CleanSweep MagnaLOCK Porter-Cable new
Guide Bushing Ring

Part Number: CS-MLRGUIDE

Use the power of your shop's dust collection system to grab sawdust where it's produced, even when doing pattern work on your router table with guide bushings!

This CleanSweep ring fits all INCRA MagnaLOCK Plates and Lifts produced since 2006 (see compatibility below). Features a 1-3/16" inside diameter within a shouldered recess to accept standard Porter-Cable style guide bushings.

The laser-cut steel ring features extra openings in strategic locations to dramatically increase dust-collecting downward airflow when combined with an INCRA CleanSweep Dust Collection Cabinet and your 4" dust collection hose.

Porter-Cable Guide bushing and lock ring not included.

spacer

*Compatibility notes for common router table types:
This ring fits ONLY 2006- or newer INCRA router plates and lifts that have a 3-5/8" opening through the bottom of the plate.  This ring is NOT compatible with grey phenolic MagnaLOCK router plates or first-generation gold INCRA Mast-R-Lifts that have a 3-1/2" opening through the bottom of the plate.

INCRA CleanSweep Router Table Adapter new
Part Number: CS-ADAPTER

Improve your router table’s dust collection!  This computer-machined MDF adapter allows attaching the INCRA CleanSweep dust collection cabinet to router tables with corner-mounted plate levelers and 9-1/4” x 11-3/4” plate openings such as Kreg, Woodhaven, and laminated MDF tables from JessEm.

In addition to providing normal access to these tables’ original corner-mounted lever leveling system, the adapter replicates the router plate support ledge found in the openings of INCRA router tables, complete with 10 large-diameter leveling bolts.

Because it increases the plate’s support surface, the CleanSweep Adapter is perfect if you own a Kreg or other “ledge-less” router table and want to upgrade to compatibility with an INCRA MagnaLOCK router mounting plate or router lift.

Includes 10 lo-head router plate leveling bolts, screws for attaching the adapter to the router table, and longer screws for mounting the INCRA CleanSweep dust collection cabinet.

Made in USA.

 
Eliminate dust at the source.
 
Integrated 4" steel blast gate with included hose clamp.
 
Roomy interior accommodates large router lifts.
 
Fits INCRA and most* other MDF or Phenolic tables with a 9-1/4" x 12" or smaller opening.
 
Space saving vertically sliding door.
 
 
Click to see
  INCRA CleanSweep Cabinet Video via Youtube.

 
Click to download
  INCRA CleanSweep Dust Collection Cabinet Instructions in PDF format.
   
Click to download
  INCRA CleanSweep Adapter Addendum in PDF format.