:: Precision Fences
    Router Table Fences
    Table Saw Fences
    INCRA I-BOX new
    Router System Accessories
    Router Tables & Stands

 :: Miter Gauges
    Miter Express
    Miter V27
    Miter V120
    Miter V120 Shopsmith
    Miter 1000
    Miter 1000HD
    Miter 1000SE Telescoping Fence
    Miter 3000
    Miter 3000SE Telescoping Fence
    Miter 5000 Miter Sled
    Miter Gauge Combo Pack
    Miter Accessories
    Comparison Chart

 :: Measuring, Marking & Layout
    Squares & Angles
    Marking Rules
    Bend Rules
    T-Rules
    Specialty Rules
    Custom Rules
    Rule Sets
    INCRA Gauge

 :: Jig & Fixture Components
    Build-It System
    Tracks
    T-Tracks
    Miter Sliders
    Miter Channels
    Right Angle Fixture

 :: Books, Plans, Videos &
    Accessories

    Free Plans
    Instructional Videos
    Books & Plans
    Stops
    HingeCrafter

 :: Become an INCRA Insider
 :: Photo Gallery
 :: Perry’s Tool Zone
 :: Parts & Components
 ::
INCRA Awards


 >> IncrementalTools.com
 
 

  TS-LS TABLE SAW FENCE
INCRA TS-LS Table Saw Fence
(32" shown here)
Part Number: LS32-TS, LS52-TS, M-LS32-TS & M-LS52-TS
 

Now available in imperial or metric!

The NEW INCRA TS-LS offers the one thing that every table saw fence should have, but none of them do, namely, Automatic Positioning Control. All other table saws depend on a tape measure and your eyesight to position your work. That's why all
table saw users are resigned to the fact that a good cut requires long set-up times and endless trial and error.



The INCRA TS-LS completely eliminates the need for these tedious processes by using INCRA'S patented lead screw technology to position your work instantly and automatically to within 0.002". Even better, if you want to repeat a cut, you can return to any former position in less than 5 seconds with ZERO repeatability error. This kind of accuracy and perfect repeatability are luxuries that woodworkers could only dream about before the INCRA TS-LS. And because of its structural design, centrally placed carriage, and optimized side mounted
clamping system, the entire unit virtually welds itself together into one solid block of steel and aluminum when locked in place. The result is exceptional strength, rigidity and stability.

TS-LS Systems are available in 32", 52", 810mm and 1230mm range models.


Spend more time cutting, less time tapping and measuring!
Now available in metric, the LS positioner's patented lead
screw positioning mechanics allow fence positioning
accuracy of +/- .002" at 1/32" increments (+/-0.05mm on
1mm increments) across its entire range. It's essentially
perfect even without the built-in micro adjust, but the large micro-adjust knob turns the lead screw against the mating threads, allowing the fence to be shifted between incremental steps with .001" (0.025mm) resolution. The incredible control
available completely eliminates the "Tap, tap, tapping" involved in making small adjustments to a conventional rip fence. And since the mike is lead screw-based and reads directly in thousandths of an inch, it's repeatable as well. This micro adjust is entirely different from the random, slow-motion knobs used on rip fences in the past.
 
INCRA's TS-LS System was one of only two fence systems to earn top scores for alignment against the blade and lack of deflection in Wood Magazine's May 2004 Rip Fence Test. Perfect alignment relative to the blade is guaranteed by the system's low friction and by the carriage lock's tremendous pressure across the sliding carriage, not unlike a traditional T-square style rip fences. The fence can be initially aligned parallel to the miter slot, slightly "relieved" on the outfeed end, or anywhere in between.
INCRA TS-LS Table Saw Fence
- 52" Range

The 52" (1320mm)-capacity TS-LS System uses 92" rails and either a 32" or 810mm LS Positioner. The standard Mount Unit (LS52-TS) handles saws measuring 28" or smaller front-to-rear (along the miter slot). Saws measuring 28" to 33-1/2" deep can be accommodated by ordering the TS-LS with the "XL" Mount Unit (LS52-TS-XL), which has a longer fence and base support panel.


Convenience and Capacity
There are two rail lengths available: The 32" (810mm)-capacity TS-LS is based on a 72" Rail length, and the 52" (1320mm)-capacity system uses 92" Rails. Both systems use the same LS32 Positioner, and quick-release knobs allow the positioner's base assembly to be shifted further from the saw blade on the 52" system's longer rails to achieve the greater capacitt. The TS Rail Support Legs are standard equipment on the 52" System.

The quick-release feature allows the positioner's base assembly to be positioned anywhere along the length of the rails to access a router table in any position, and the base assembly can removed in seconds, giving you total access to the saw's surface. The quick release also allows the base assembly to be reversed on the rails to allow about 14" (350mm) of ripping capacity to the left of the blade. After the fence and base assembly has been removed from the rails or repositioned, three pairs of stops on the rails guarantee that the fence system stays perfectly aligned and calibrated, time after time.
Will the INCRA TS-LS fit on my table saw?
The INCRA TS-LS will fit directly on just about any standard 10" table saw, typically without any drilling or tapping. There are only two things you need to check to make sure that it will fit your saw:

1. The length of miter gauge slot (front-to-back distance of table). If this measurement is 28-1/2” or less (standard for most 10" table saws), the standard INCRA TS-LS will will fit your saw. If this measurement is between 28-1/2” and 33”, the TS-LS System can be ordered with a longer fence extrusion and base support panel for a nominal charge as a substitution for the standard-length components.

2. The front and rear surfaces of the saw. These surfaces must be flat and square to the top, with at least two holes in each surface. Hole locations and diameter are unimportant because INCRA's universal rail mounting brackets will work with any hole pattern and a wide variety of hole sizes.

See the TS-LS Compatibility Chart for more information regarding the TS-LS & TS Router Table installations.
 
Package #1 - Pair of 72" Rails
Package #2 - Base Mount Unit
Package #3 - LS32 Positioner
 
 
  TS-LS Specifications:
  Positioning Range - Right of Blade: 32" or 810mm Metric
  Positioning Range - Left of Blade: 14", 355mm
  Positioning Accuracy: .002" Over Full Range
  Repeatability: Return to any former position in less than 5 seconds with
   ZERO repeatability error
  Fence Length: 36"
 
  INCRA TS-LS Table Saw Fence - 32" Range consisting of:
  TS-IIIAMOUNT - Base Mount Unit and TS-IIIA Rip Fence
  RAIL72 - 72" Rails - PAIR
  LS32 - INCRA LS 32" Range Positioner
 
  INCRA TS-LS Table Saw Fence - 52" Range consisting of:
  TS-IIIAMOUNT - Base Mount Unit and TS-IIIA Rip Fence
  RAIL92 - 92" Rails - PAIR
  LS32 - INCRA LS 32" Range Positioner
  TSLEGS - INCRA TS Rail Support Legs


 
Five Sliding Scale
Template Channels All LS
Positioners include a Primary Stainless Steel Scale, a "Floating" Reference Scale and an Auto-Centering Scale. The Primary scale adjusts on a magnetic track in the first channel to indicate distance from the cutter. The Reference Scale "floats" in a second channel to indicate distance from the last cut or any other reference point of your choosing. The Auto-
Centering Scale (imperial systems only) fits in a third channel to Automatically and
Effortlessly center your work for any operation.
 
Easy On, Easy Off
Dismounts for cross-cutting
operations and remounts in
less than 10 seconds. This
also makes it easy to use
INCRA precision on both sides of the blade. The positioning range is 32" to the right and 14" to the left of the blade. The new TS-LS removes exactly the same way as the TS Ultra shown here.
 
These "saddle" brackets not only allow fast dismounts, the clever design of INCRA's
centrally placed carriage
literally forces the fence into perfectly parallel alignment at any position. These brackets also ride above the table saw
surface to allow ovement
anywhere along the 72" rails in either direction.
 
The fence skims above the
table on whisper smooth glides, eliminating all fence to table contact.
 
Quick, Easy Installation
Universal mounting brackets virtually guarantee compatibility
with any 10" table saw, with no drilling, no tapping and no modifications.
 

INCRA
Wonder Fence
To make accurate edge-
shaping operations a precise pleasure.

INCRA
TS-LS
Joinery
System
This joinery and fence
system will make a dual-workstation setup possible on your table saw.
 
Click to download
  TS-LS Introduction in Windows Media Video format.

Click to download
  NEW Live Demos:
TS-LS Table Saw Fence
- Part 1 of 3

TS-LS Table Saw Fence
- Part 2 of 3

TS-LS Table Saw Fence
- Part 3 of 3

in Windows Media Video format.
 
Click to download
  INCRA TS-LS Manual in PDF format.