Table Saw Router Table Tops

precision fences > router tables & stands

Table Saw Router Table Tops

Table Saw Router Table Tops

Part Number: TSRT2821L, TSRT2832R, TSRT3221L & TSRT3232R (TSRT2821L shown here)



All INCRA Router Tables are shipped with a 3/8" solid aluminum router mounting plate, pre-drilled for your router, featuring the exclusive MagnaLOCK™ Magnetic Reducing Ring System. Changing any of the included throat plates is a snap with the MagnaLOCK™ System. Just drop in the selected ring and the high energy, rare-earth magnets hold it securely and perfectly flush every time.  The rings have their own leveling system within the plate.  All of our router mounting plates include 3 laser cut rings with 1", 2-1/8" and 3-5/8" openings. 

Rather than the typical router plate leveling set screws that dig into the table's recess requiring constant re-adjustment, INCRA's plate leveling system puts 10 large flat head levelers into the table itself for excellent support. Convenient access to these levelers is through the 10 access holes located around the perimeter of the mounting plate, and after leveling, a simple quarter turn of the corner mounted Cam-Lock securely holds the plate in the router table's recess.

Available in 4 models designed specifically for the INCRA TS-LS and TS-III table saw fence systems.  All table saw based router tables include the TS Router Table Support Kit with 4 brackets and 2 table stiffeners. The brackets can be positioned anywhere along the INCRA TS System's rail length and are vertically adjustable.



INCRA 28" x 21" TS Router Table Top 
with Router Mounting Plate & Hardware

INCRA 28" x 21" TS Router Table Top with TSRTHW
INCRA 28" x 21" TS Router Table Top with TSRTHW
Part Number: TSRT2821L
> more info


INCRA 28" x 21" TS Router Table Top with TSRTHW Dimensions

This 28" x 21" router table replaces the left-side extension wing on the saw. Its size is appropriate for saws measuring 27"-28" deep along the miter slot, and it allows working at the more open left end of the saw for plenty of routing capacity and easy access around the router table.

Requires the use of an INCRA TS-LS or TS-III table saw fence system.  Not compatible with cabinet saws that have motor housings on the left side of the saw - check the Compatibility Chart for more info.




INCRA 28" x 32" TS Router Table Top
with Router Mounting Plate & Hardware

INCRA 28" x 32" TS Router Table Top with TSRTHW
INCRA 28" x 32" TS Router Table Top with TSRTHW
Part Number: TSRT2832R
> more info


INCRA 28" x 32" TS Router Table Top with TSRTHW Dimensions

The 28" x 32" Right-hand table serves double duty as a work surface extension and includes a full size 3/8" x 3/4" T-Slot Miter Channel. This table is for use with saws measuring 27"-28" deep along the miter slot. This table allows 5" - 7" of routing capacity without moving the TS system's base assembly on the rails, and the fence system can be reversed if more capacity is needed.

Requires the use of an INCRA TS-LS or TS-III table saw fence system.  Not compatible with cabinet saws that have motor housings on the right side of the saw when used with 72" INCRA rail sets - check the Compatibility Chart for more info.  TS Rail Support Legs highly recommended.




INCRA 32" x 21" TS Router Table Top
with Router Mounting Plate & Hardware

INCRA 32" x 21" TS Router Table Top with TSRTHW
INCRA 32" x 21" TS Router Table Top with TSRTHW
Part Number: TSRT3221L
> more info


INCRA 32" x 21" TS Router Table Top with TSRTHW Dimensions

The 32" x 21" Left-side router table permits maximum fence system range and offers open access from the end of the table saw by sliding the INCRA positioner assembly down the rails. This table replaces the saw's left side extension wing and is sized for saws with oversize cast iron tops measuring 30" - 31" deep along the miter slot.

Requires the use of an INCRA TS-LS or TS-III table saw fence system.  Not compatible with cabinet saws that have motor housings on the left side of the saw - check the Compatibility Chart for more info.



INCRA 32" x 32" TS Router Table Top
with Router Mounting Plate & Hardware

INCRA 32" x 32" TS Router Table Top with TSRTHW
INCRA 32" x 32" TS Router Table Top with TSRTHW
Part Number: TSRT3232R
> more info


INCRA 32" x 32" TS Router Table Top with TSRTHW Dimensions

The 32" x 32" Right-hand table serves double duty as a work surface extension and includes a full size 3/8" x 3/4" T-Slot Miter Channel. This table is for use with saws measuring 27"-28" deep along the miter slot. This table allows 5" - 7" of routing capacity without moving the TS system's base assembly on the rails, and the fence system can be reversed if more capacity is needed.

Requires the use of an INCRA TS-LS or TS-III table saw fence system.  Not compatible with cabinet saws that have motor housings on the right side of the saw when used with 72" INCRA rail sets - check the Compatibility Chart for more info.  TS Rail Support Legs highly recommended.


*Note: Specify your router preference when placing an order with your INCRA dealer. (See PDF for compatibility chart).




detail focus

In the table plate leveling system

In the table plate leveling system.

3/8" x 3/4" T-Slot Miter Channel

3/8" x 3/4" T-Slot Miter Channel.

Cam-Lock 1/4 turn plate locking

Cam-Lock 1/4 turn plate locking.

Solid Aluminum Mounting Plate w/MagnaLOCK Throat Plate System

Solid Aluminum Mounting Plate w/ MagnaLOCK™ Throat Plate System.

TS Router Table Support Kit

Includes TS Router Table Support Kit (TSRTHW). Also sold separately for user made tables.

downloads

Image

Click to download Router Tables & Plates Instructions in PDF format.

Image

Click to download INCRA Aluminum MagnaLOCK™ Plate Compatibility Chart in PDF format.

Image

Click to download INCRA TS-LS Fence System & Router Table Compatibility Chart in PDF format.

video demos

Image

Click to download INCRA Router Table Tops & Plates Video in Windows Media format.

accessories

CleanSweep

INCRA CleanSweep Dust Collection Improved dust collection for all of your router table work!

TS legsINCRA Table Saw Rail Support Legs Directly support the rails of the TS-LS, TS-III, and TS-II Systems, adding stability to the entire saw platform.
INCRA 8pcs MagnaLOCK Ring SetINCRA 8pcs MagnaLOCK™ Ring Set For upgrading an existing INCRA Table Saw System.