incra
mast-r-lift ii

We’re very pleased to introduce the INCRA Mast-R-Lift II, still custom built just for us by JessEm in their Ontario, Canada facility.

Like the previous version, the INCRA Mast-R-Lift II allows fast, incredibly precise height adjustments conveniently made from above the table, and it also provides you with the ability to change router bits from above.

This new model uses an exclusive system with a total of 5 sealed ball bearings on the lift screw and cam lock, making it the smoothest, lowest-friction router lift we’ve ever used we’ve actually cranked up the heaviest routers with just one finger! The quarter-turn cam lock is operated from the top using the lift crank to eliminate height drift. The previous generation was effectively bomb-proof, and we expect the new model to continue that reliability.

Lots of great features in a simple, attractive package!
Exclusive INCRA MagnaLOCK™ Reducing Ring System for instant ring changes & perfect ring fit
Includes 5 steel reducing rings - 3/8", 1", 1-5/8", 2-5/8", 3-5/8"
Change router bits from the top of the table
Quickly make super precise, 0.001” height adjustments from above
Exclusive ball bearing mechanism for super smooth action & low friction
Ultra-responsive, direct drive 16TPI lift screw mechanism
Patented thread tensioning system eliminates vertical lash in the lift mechanism
Precision-machined 9-1/4" x 11-3/4" x 3/8" aircraft aluminum top plate is hard-anodized for durability
Corner-mounted cam screw ensures a snug fit in the router table
9-1/4" x 11-3/4" x 3/8” plate size is compatible with all INCRA Router Tables and fits some other brands

The standard version has a 9-1/4" x 11-3/4" x 3/8” plate size that's compatible with all INCRA Router Tables and some other brands. There is also a special version available exclusively through Rockler with an 8-1/4" x 11-3/4" plate size to fit Rockler and Bench Dog router tables.

Also improved on the INCA Mast-R-Lift II: the new carriage design accommodates a wide variety of routers without the need for adaptors. The four aluminum clamping blocks are simply repositioned on the carriage plate when changing from one model of router to the other.

Router Table Compatibility: Fits all INCRA Router Tables and some other brands that use a 9-1/4" x 11-3/4" x 3/8" plate size with a 0.750” corner radius. For tables like Kreg and JessEm that have no rabbeted ledge, use the INCRA CleanSweep Table Adapter to support the router lift. These versions of the INCRA Mast-R-Lift II are not compatible with Rockler or Bench Dog tables.

Motor Compatibility: No adapters needed! The four aluminum clamping blocks have 6 preset positions on the carriage plate to match the diameters of a wide range of fixed-base router motors. 

Imperial INCRA Mast-R-Lift II:

- Triton Motor TFBR001

- Porter Cable 7518, 690-699 series, & 890-899 series

- JessEm PowRTek SR05300, PowRTek 05200

- SpinRite (Woodpeckers)

- Bosch 1617EVS,1618, GMF1400

- Milwaukee 5625, 5615, 5616, & 5619

- Bora/Portamate P-254, -6000, & -6250

- MLCS 9564

- DeWalt DW610 & DW618

- Makita RF1101 & RD1101

- Hitachi M12VC & KM12VC

- Craftsman 17543, 17540, & 28190

- Skil RT1322

- Ridgid R29302

- Rutlands R5018

- AUKTools V2, V3 ER 230V

- Grizzly T32461


Metric INCRA Mast-R-Lift II:
(Currently NOT compatible with Milwaukee Routers)

- Triton Motor TFBR001

- Porter Cable 7518, 690-699 series, & 890-899 series

- JessEm PowRTek SR05300, PowRTek 05200

- SpinRite (Woodpeckers)

- Bosch GMF1400, 1617EVS,1618

- AEG 1400KE

- Felisatti RF62/1500VE

- AUKTools V2, V3 ER 230V

- DeWalt DW610 & DW618

- Makita RF1101 & RD1101

- Hitachi M12VC & KM12VC

- Bora/Portamate P-254, -6000, & -6250

- MLCS 9564

- Craftsman 17543, 17540, & 28190

- Ridgid R29302

- Rutlands R5018

- Grizzly T32461

See the Router Lift Compatibility Chart for more information