incra i-box jig
precision fences > router table fences
incra i-box jig for box joints (standard & shopsmith)
Part Number: INCRA I-BOX & INCRA I-BOXSHOPSMITH
Box joint made easy with on the table saw & router table. To get right to the point, the new INCRA I-Box is the most advanced tool ever produced for creating a stunning variety of box joints & finger joints. Its revolutionary design allows faster setup, greater versatility, and improved user safety compared to traditional jigs. At the same time, it's easy to use and the free online instructional video covers everything from basic setup to advanced decorative joinery.
This versatile design works on both table saws and router tables, and it's available to fit either 3/4" x 3/8" standard miter slots or Shopsmith machines. We also offer unique I-Box Combos and accessories to get you up and running fast - box joint blades, gear for making wooden hinges, spare backer boards and more.
This versatile design works on both table saws and router tables, and it's available to fit either 3/4" x 3/8" standard miter slots or Shopsmith machines. We also offer unique I-Box Combos and accessories to get you up and running fast - box joint blades, gear for making wooden hinges, spare backer boards and more.
The I-Box is an evolutionary leap forward from conventional box joint methods - this single jig can be used on both your table saw and your router table, and the IBox's dual pitch lead screw mechanics easily micro-adjust joint tightness & provide a whopping 1/8" - 3/4" range of pin widths. It's capable of making good fitting box joints using any width cutter within that range into lumber from 1/4" to 7/8" thick.
The advantages continue far beyond the basics: I-Box-exclusive joints like the Center Keyed Box Joint can be used to produce symmetric patterns on any width lumber, allowing you the flexibility to create joinery that matches existing project plans rather than altering board widths to fit the limited possibilities of traditional box joint jigs.
The Splined Box Joint is yet another INCRA-only decorative joint that's guaranteed to add wow-factor to your projects, and the I-Box can even be used to produce an unlimited variety of classic dentil mouldings!
Nothing says "craftsmanship" like adding solid wood hinges to your projects, and the I-Box can be used in conjunction with the INCRA HingeCrafter to produce wooden hinges in four different barrel diameters and in lengths up to 10". Works with the metric HingeCrafter, too!
If you've been looking to improve your shop's joinery capabilities with a fast, versatile, and easy to use method for producing box joints of all descriptions, the INCRA I-Box is what you've been waiting for.
Made in USA.
The INCRA I-Box is a Taylor Design Group, Inc. - Schaffter product.
The Splined Box Joint is yet another INCRA-only decorative joint that's guaranteed to add wow-factor to your projects, and the I-Box can even be used to produce an unlimited variety of classic dentil mouldings!
Nothing says "craftsmanship" like adding solid wood hinges to your projects, and the I-Box can be used in conjunction with the INCRA HingeCrafter to produce wooden hinges in four different barrel diameters and in lengths up to 10". Works with the metric HingeCrafter, too!
If you've been looking to improve your shop's joinery capabilities with a fast, versatile, and easy to use method for producing box joints of all descriptions, the INCRA I-Box is what you've been waiting for.
Made in USA.
The INCRA I-Box is a Taylor Design Group, Inc. - Schaffter product.
The INCRA I-Box is packed with innovative features:
- Use it on your table saw or router table to cut great looking box joints with a stacking-type dado blade, dedicated box joint blade set, or straight router bits
- Reversible design works on either side of the cutter
- Exclusive dual-pitch lead screw mechanism for fast micro-adjusting and a broad 1/8" - 3/4" range of pin widths cut into lumber from 1/4" to 7/8" thick
- Exclusive INCRA GlideLOCK miter bar fits standard 3/4" x 3/8" miter slots with a 0.740" - 0.762" adjustment range
- Works alongside the INCRA HingeCrafter to produce solid wood hinges Front and rear blade guards; front guard also stabilizes boards vertically and is adjustable for 1/4" to 7/8" lumber thicknesses for box joints or even thicker for other applications
- The wide fence allows clamping lumber securely into position while cutting much better than hand-held boards, especially when joining small or large lumber (hand screw clamp not included)
- Reversible & reusable MDF sub fence dramatically reduces or eliminates tearout
- Exclusive INCRA GlideLOCK miter bar fits standard 3/4" x 3/8" miter slots with a 0.740" - 0.762" width adjustment range or is available in a version for Shopsmith machines. Miter bar position adjustable up to 7-1/2" away from saw blades (edge of blade to center of miter slot) or up to 7-3/4" from routers (center of collet to center of miter slot).
- Reversible design works on either side of the cutter
- Exclusive dual-pitch lead screw mechanism for fast micro-adjusting and a broad 1/8" - 3/4" range of pin widths cut into lumber from 1/4" to 7/8" thick
- Exclusive INCRA GlideLOCK miter bar fits standard 3/4" x 3/8" miter slots with a 0.740" - 0.762" adjustment range
- Works alongside the INCRA HingeCrafter to produce solid wood hinges Front and rear blade guards; front guard also stabilizes boards vertically and is adjustable for 1/4" to 7/8" lumber thicknesses for box joints or even thicker for other applications
- The wide fence allows clamping lumber securely into position while cutting much better than hand-held boards, especially when joining small or large lumber (hand screw clamp not included)
- Reversible & reusable MDF sub fence dramatically reduces or eliminates tearout
- Exclusive INCRA GlideLOCK miter bar fits standard 3/4" x 3/8" miter slots with a 0.740" - 0.762" width adjustment range or is available in a version for Shopsmith machines. Miter bar position adjustable up to 7-1/2" away from saw blades (edge of blade to center of miter slot) or up to 7-3/4" from routers (center of collet to center of miter slot).
videoS
[NEW I-Box Video]
detail focus
Works at your table saw
... and your router table
1. Built-in miter gauge with GlideLOCKTM adjustable
miter bar
2. Front and rear blade guards for maximum safety
Micrometer adjustment for ultra-fine control
Easily cut 2 or more pieces at a time up to 1” total thickness (Hand screw clamp not included)
As a bonus, the I-Box can even be used to produce classic dentil mouldings! Altering the spacing between cuts and height of the cutter lets you change the moulding's proportions to create a nearly infinite variety.
downloads
Click to download INCRA I-Box Manual in PDF format.
video demos
Click to download INCRA I-Box Video in Windows Media format.
accessories
INCRA CleanSweep Dust Collection Improved dust collection for all of your router table work.
