INCRA Miter v120

incra miter gauges > miter v120

INCRA Miter V120

miter V120

Part Number: MITEREV120

AngleLOCK indexing system

Don't let the small size fool you! The NEW Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers. An incredible 120 angle stops are laser cut into the steel protractor, with a stop available for every whole degree and two special stops at 22.5 degrees for cutting eight-sided frames and mouldings.
All of that precision is built into a sturdy, no-fuss package that's compact enough to fit machines where other miter gauges can be a tight squeeze, such as band saws and disc sanders. All-steel construction makes it an excellent long-term investment, and it's also upgradable as your needs change - the V120 can be equipped at any time with any IncraLOCK miter gauge fence and stop.

The steel miter bar is equipped with four patented GlideLOCK adjustment points for a perfect, low-friction fit in a wide variety of machines using a standard miter slot. As with all INCRA crosscutting tools, a removable T-slot retaining clip is included, and the adjusters are accessible from the top for quicker set up than traditional miter bars with side-mounted adjusters.

The V120's adjustable miter bar will fit square-sided miter slots 3/4" wide, 3/8" deep, and either with or without a 15/16" wide T-slot at the bottom. The miter bar's adjustment range accommodates slot widths between 0.740" to 0.760".

Will the Miter V120 fit my saw? Click here to find out!

perfect angles:

Table Saw
Band Saw

in any miter slot:

Router Table
Disk/Belt Sander

INCRA Miter V120 Features:

- 120 Positive Angle Stops

- GlideLOCK Miter Bar with 4 Expansion Points

- 1 Degree Increments

- Special Stops at Plus or Minus 22-1/2 Degrees

- Plus or Minus 60 Degrees Range


detail focus

Removeable T-Clip

Because the Miter V120 is designed to fit in all tools with a standard 3/4" x 3/8" miter channel, the T-clip is removeable since many older or smaller tools have plain miter channels without the "T-slot".

Expansion Point

Four expansion points adjust for ZERO side play, anti- friction travel on all tools with standard (or near standard) miter gauge channels, including Delta, Craftsman, imports, etc. This means the bar WON'T wiggle around in the miter slot!



Click to download INCRA Miter V120 Manual (NEW) in PDF format.


Click to read INCRA Miter Gauge e-Brochure.


Click to see Miter Gauge Comparison Chart.


Click to see Miter V120 Compatibility Checker.

video demos


Click to download INCRA Miter V120 Video in Windows Media format.


Click to download Complete INCRA Miter Gauge in Windows Media format (31.7MB, PLEASE BE PATIENT - this may take several minutes to load.)


INCRA Miter ChannelsINCRA Miter Channels Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs.
INCRA 18" Flip FenceINCRA 18" Flip Fence 18" long IncraLOCK Flip-Shop Stop Cut-off Fence with positioning racks (uses the INCRA Flip-Shop Stop only).
Flip Shop StopINCRA Flip Shop Stop Instant, repeatable accuracy without measuring. Dual, pivoting FLIP arms. Compatible with all Incremental FLIP-Shop Stop Cut-off Fences.